Polypropilene corrugated pipe

Euro EM Piatra Neamt company produces corrugated pipes made of polypropylene

APLICATION

EuroEM pipes and fittings made of PPHM are especially designed for underground sewerage and drainage gravitational systems. Due to high thermal and chemical resistance, they are perfect for industrial sewerage systems.

EEM PPHM type corrugated pipes are highly resistant to cracks and mechanical shocks. Most recent research on pipes made of polypropylene confirms their minimum 100-year lifetime, and performance tests indicate that the usage period is even longer.

This is the main reason for which the EEM PPHM type pipe system is used for:

  • Sewerage systems – for wastewaters
  • Highway construction
  • Surface water draining
  • Sewerage systems for industrial wastewaters
  • Collection systems for rainwaters (basins)
MATERIAL

EEM PPHM type corrugated pipes and fittings are made of high impact polypropylene – PP-B copolymer.

COLOR

• Exterior: Black
• Interior: Blues/Green/White

LENGTH

The standard useful length of the EEM type corrugated pipe is 6 m.

Annular RIGIDITY

Due to state-of-the-art technology, modern design of the profile and the correct type of raw material, the EuroEm PPHM type corrugated pipes are extremely resistant. This allows the production of corrugated pipes with high annular rigidity, between 4-16. Ring rigidity is calculated according to EN 9969 standard.

Euro EM Piatra Neamt company produces polypropylene corrugated pipes, with diameters between ID-100 mm-ID and 1200 mm and rigidity class:
SN 4
SN 8 (FLEXION 1700 MPa)
SN 16 (FLEXION 2000 MPa )

  • The high ring rigidity class, which exceeds SN8
  • Due to the flexural modulus of the PPHM material, corrugated pipes with the SN16 ring rigidity class can be produced.
  • Solid reinforced plastic pipe SOLID CONNECT - safe and insoluble.
  • Low weight, which allows easy and fast pipe fastening.
  • High chemical resistance.
  • Highest abrasion resistance.
  • Low roughness coefficient.
Annular FLEXIBILITY

Sewage systems are subject to the stress of the ground load or, for example, to the stress caused by the sliding motion of the soil. EEM PPHM corrugated pipes are elastic and retain their shape. If this deformation occurs over a longer period, the voltage in the pipe goes down until the practical no longer exists.

The TIGHTNESS Feature
The TIGHTNESS Feature

The combination of EEM PPHM Corrugated Pipes is very good, it offers 100% watertightness even during soil displacement. The corrugated pipes are flexible and adapt to uneven soil or soil movement, and the pipework remains intact - (stays tight and tight as shown in picture no. 1).

While the rigid pipes of other materials exhibit high resistance, the maximum bending radius is large at the plug, and over time, the pipe movement may occur due to higher bending and the tightness is low (see picture no. 2).

For more information, please contact our team!